13" wheels on a Fury IRS

For general chat, questions etc about cars designed by JP - the main forum
Waggytee
Posts: 26
Joined: Thu Aug 11, 2011 9:50 pm
Name: james morris

13" wheels on a Fury IRS

Postby Waggytee » Fri Sep 26, 2014 6:33 pm

Thinking of putting some sticky rubber on the Fury, however it's currently running 14" wheels - options are 888's or switching to 13's

Has anyone with a Fury IRS and rear Sierra brakes got 13" wheels to fit as the clearance to the calipers looks like it's going to be close - my preference would be Compomotive CXR's (which are just about to go back into production for anyone who wants any)

Thanks.

User avatar
dopdog
Posts: 934
Joined: Tue May 04, 2010 6:50 am
Name: Simon Boulter
Location: Oxfordshire

Re: 13" wheels on a Fury IRS

Postby dopdog » Fri Sep 26, 2014 7:21 pm

you need to do a bit of a search on here as we have had this a few times but it can be done

User avatar
adithorp
Posts: 1200
Joined: Thu Jul 02, 2009 8:26 am
Name: adrian thorp
Location: Hyde, Manchester

Re: 13" wheels on a Fury IRS

Postby adithorp » Fri Sep 26, 2014 10:43 pm

I think the issue is normally with the return spring on the handbrake lever. Runs in my mind there are modified springs available. Think the cable bracket might need a tweek as well.

Found this about springs on locostbuilders... http://www.locostbuilders.co.uk/viewthr ... tid=178955

User avatar
pigeondave
Posts: 397
Joined: Wed Oct 05, 2011 4:16 pm
Name: David Malenczak
Location: Brighton

Re: 13" wheels on a Fury IRS

Postby pigeondave » Fri Sep 26, 2014 11:18 pm

Have you tried Steve @ Fury Sports Cars ?

The dark blue car he is currently building with Image wheels had some issues with the rear brakes I think it might have been wilwoods on the rear that had to be changed back to the originals but i cant remember what the original calipers were/are.

worth a try.

Waggytee
Posts: 26
Joined: Thu Aug 11, 2011 9:50 pm
Name: james morris

Re: 13" wheels on a Fury IRS

Postby Waggytee » Sat Sep 27, 2014 2:50 pm

Many thanks all - I'll do some further investigations

User avatar
robcollingridge
Posts: 40
Joined: Wed Jul 01, 2009 10:35 pm
Name: Robert Collingridge

Re: 13" wheels on a Fury IRS

Postby robcollingridge » Wed Oct 01, 2014 8:09 pm

I've Compomotive CXRs in 13" rims on my Fury R1. They run over standard Sierra rear calipers.

http://www.robcollingridge.com/kitcar/d ... index.html

I have used 10mm spacers to get caliper clearance but I'm also using the same size and offset wheels front and back.

Waggytee
Posts: 26
Joined: Thu Aug 11, 2011 9:50 pm
Name: james morris

Re: 13" wheels on a Fury IRS

Postby Waggytee » Sat Oct 04, 2014 1:41 pm

thanks Rob - I did look at your website before and it appeared you managed it OK.

User avatar
robcollingridge
Posts: 40
Joined: Wed Jul 01, 2009 10:35 pm
Name: Robert Collingridge

Re: 13" wheels on a Fury IRS

Postby robcollingridge » Wed Oct 08, 2014 8:59 pm

Yes, the main issue was not the size of the calipers but the clearance on the handbrake mechanism. The 10mm spacers gave me plenty of clearance. The alternative is to use a different offset wheel but when I bought mine I didn't know what they should be, so I kept the front and rear wheels the same. Actually handy as I can swap the fronts/rears to get more even tyre wear, though with my driving style there doesn't seem to be much difference and they all wear quite evenly (and very quickly!) :-)


Return to “Jeremy Philips Cars”

Who is online

Users browsing this forum: No registered users and 16 guests