Thinking of putting some sticky rubber on the Fury, however it's currently running 14" wheels - options are 888's or switching to 13's
Has anyone with a Fury IRS and rear Sierra brakes got 13" wheels to fit as the clearance to the calipers looks like it's going to be close - my preference would be Compomotive CXR's (which are just about to go back into production for anyone who wants any)
Thanks.
13" wheels on a Fury IRS
- dopdog
- Posts: 934
- Joined: Tue May 04, 2010 6:50 am
- Name: Simon Boulter
- Location: Oxfordshire
Re: 13" wheels on a Fury IRS
you need to do a bit of a search on here as we have had this a few times but it can be done
- adithorp
- Posts: 1200
- Joined: Thu Jul 02, 2009 8:26 am
- Name: adrian thorp
- Location: Hyde, Manchester
Re: 13" wheels on a Fury IRS
I think the issue is normally with the return spring on the handbrake lever. Runs in my mind there are modified springs available. Think the cable bracket might need a tweek as well.
Found this about springs on locostbuilders... http://www.locostbuilders.co.uk/viewthr ... tid=178955
Found this about springs on locostbuilders... http://www.locostbuilders.co.uk/viewthr ... tid=178955
- pigeondave
- Posts: 397
- Joined: Wed Oct 05, 2011 4:16 pm
- Name: David Malenczak
- Location: Brighton
Re: 13" wheels on a Fury IRS
Have you tried Steve @ Fury Sports Cars ?
The dark blue car he is currently building with Image wheels had some issues with the rear brakes I think it might have been wilwoods on the rear that had to be changed back to the originals but i cant remember what the original calipers were/are.
worth a try.
The dark blue car he is currently building with Image wheels had some issues with the rear brakes I think it might have been wilwoods on the rear that had to be changed back to the originals but i cant remember what the original calipers were/are.
worth a try.
-
- Posts: 26
- Joined: Thu Aug 11, 2011 9:50 pm
- Name: james morris
Re: 13" wheels on a Fury IRS
Many thanks all - I'll do some further investigations
- robcollingridge
- Posts: 40
- Joined: Wed Jul 01, 2009 10:35 pm
- Name: Robert Collingridge
Re: 13" wheels on a Fury IRS
I've Compomotive CXRs in 13" rims on my Fury R1. They run over standard Sierra rear calipers.
http://www.robcollingridge.com/kitcar/d ... index.html
I have used 10mm spacers to get caliper clearance but I'm also using the same size and offset wheels front and back.
http://www.robcollingridge.com/kitcar/d ... index.html
I have used 10mm spacers to get caliper clearance but I'm also using the same size and offset wheels front and back.
Rob Collingridge
http://www.robcollingridge.com/kitcar
http://www.robcollingridge.com/kitcar
-
- Posts: 26
- Joined: Thu Aug 11, 2011 9:50 pm
- Name: james morris
Re: 13" wheels on a Fury IRS
thanks Rob - I did look at your website before and it appeared you managed it OK.
- robcollingridge
- Posts: 40
- Joined: Wed Jul 01, 2009 10:35 pm
- Name: Robert Collingridge
Re: 13" wheels on a Fury IRS
Yes, the main issue was not the size of the calipers but the clearance on the handbrake mechanism. The 10mm spacers gave me plenty of clearance. The alternative is to use a different offset wheel but when I bought mine I didn't know what they should be, so I kept the front and rear wheels the same. Actually handy as I can swap the fronts/rears to get more even tyre wear, though with my driving style there doesn't seem to be much difference and they all wear quite evenly (and very quickly!) 

Rob Collingridge
http://www.robcollingridge.com/kitcar
http://www.robcollingridge.com/kitcar
Return to “Jeremy Philips Cars”
Who is online
Users browsing this forum: No registered users and 15 guests