striker front suspension help :)

[striker-4age]

hi everyone

need help on the front suspension of my striker mk2 (inboard), does anyone know what the lower bushes are from on the w/bone ?


many thanks
kevin

[dopdog]

I would give Raw a ring on this one.

[micha]

arent they the same size as the ones in rear trailing arms?:

if yes..than click here:

http://www.antivibrationmethods.com/Pro ... fault.aspx


this should be the type you need: BP636/2

[RobMsport]

Strikers surely don't still run those horrible rubber bonded bushes do they A pig to get out and tricky to fit , not being able to torque the 1/2 inch bolts up until the car's resting on the ground --- they're wrecked before you start if bolted up when up on stands. I've run race spec urethanes in SS inners for 12 yrs and only replaced them when fitting updated wishbones/rear links ---- the bushes were still fine and that was after 5yrs abuse.

WISBECH ENGINEERING --- £0.57 PER HALF BUSH ---- £1.60 PER SS INNER SLEEVE plus vat of course and all can be changed in minutes.