Alloy Hubs for a Fury

[pigeondave]

Hi everybody,

Im after some alloy hubs for the Fury. Does anyone know where I can get some?

The Rally Designs ones are 10mm wider than standard
The Hi spec ones move the disc inboard a bit more which means the caliper has to be moved in too.

Does anyone know of a straight swap ?

[jeffw]

Yes, mine....and I've no idea where they came from. If you have spoken to Steve I'm sure you are aware of this !

[pigeondave]

Steve says he doesn't know where to get any that are a straight swap.

When at Fishers steve said they made their own.

Anyone know if wilwood Sunbeam Tiger hubs would fit?
http://www.wilwood.com/Hubs/HubProd.asp ... =270-11746

[phoenix]

RS 2000 Hubs from Burton should fit.

[adithorp]

Think he might have cracked it...

http://www.burtonpower.com/parts-by-cat ... p1000.html

[pigeondave]

mmmm
below is the email from group4 fab

GRP4 FABRICATIONS sales@grp4fabrications.com

HI David
All our hubs are to suit the rs200 stub axle and not the standard mk2 type(not sure maybe there is a difference)
I think you need to check this before we go any futher.
Let me know if you find out any more and we can certainly sort if for you then.


So the question is are the stub axles the same? bearing diameters and length between bearings

I dont want to get another set of paper weights as I have 2 sets already

[jeffw]

We did this already....and they are not the same....