Need More parts info

For general chat, questions etc about cars designed by JP - the main forum
Post Reply
Mullster
Posts: 12
Joined: Sun Nov 07, 2010 7:00 am
Name: Peter

Need More parts info

Postby Mullster » Wed May 25, 2011 8:21 am

Hello again,
Recently I asked for advise about front suspension parts for my 03 Phoenix and I recieved the following info and I inturn ordered the parts.

Bottom swivel (Front suspension) Quinton Hazell part - QR 1774RHT
Be careful buying a pair for the Sherpa, as one is right hand thread, the other left hand.
You need 2 x RHT. Many of the ebay ones are LHT
http://cgi.ebay.co.uk/LDV-SHERPA-285-35 ... 45f31e4002

I just went to fit these items and found that they do not fit. The threaded section of the existing part is 19mm in Dia while the new one is 20mm and the new part has a much larger tapered pin.
Does anybody have any ideas???????


Peter :?
Top
User avatar
clairetoo
Posts: 19
Joined: Thu Jul 02, 2009 7:39 pm
Name: Claire Rule
Location: Leicester
Contact:
Contact clairetoo

Re: Need More parts info

Postby clairetoo » Wed May 25, 2011 7:58 pm

Sounds like you have Transit ones as used on most locost's as top ball joints - they are M20 with too large a taper for escort uprights ?
8 is too many , 4 aint enough , so it's gotta be 6
Top
User avatar
matt_gsxr
Posts: 291
Joined: Tue Jul 14, 2009 2:18 pm
Name: Matthew Robson
Location: Oxford

Re: Need More parts info

Postby matt_gsxr » Wed May 25, 2011 11:23 pm

Sorry, I think it was my duff advice. It was quoted directly from the manual though.

Matt
Top
Mullster
Posts: 12
Joined: Sun Nov 07, 2010 7:00 am
Name: Peter

Re: Need More parts info

Postby Mullster » Sun May 29, 2011 2:53 am

Hi Matt,
Its not your fault, I have been doing some more research and it appears that some of the Sherpa's use the one that I bought :( . I should have bought the SS1102 not the SS5016, this is apparently a replacement for the QR1774RH.
If any one knows where I may be able to buy the correct part and get it sent to Australia I would love to know their details.

Peter :)
Top
User avatar
matt_gsxr
Posts: 291
Joined: Tue Jul 14, 2009 2:18 pm
Name: Matthew Robson
Location: Oxford

Re: Need More parts info

Postby matt_gsxr » Mon May 30, 2011 3:42 pm

You could ask the Raw-striker guys. They support the Phoenix, and it isn't a difficult task for them to put one in a box and go the post office.

If you struggle to find someone who does this for a living then let me know and I can try to get one from my local spares place and ship to you.

Matt
Top
User avatar
deecee
Posts: 213
Joined: Mon Nov 09, 2009 12:19 am
Name: David Cockburn

Re: Need More parts info

Postby deecee » Mon May 30, 2011 4:03 pm

I wonder if they are the same as the Fury, seems likely. I know there was an issue with aftermarket parts not being exactly as the originals although they were OK on the Sherpa.

Steve Hughes at Fury Sports Cars may be able to help. See http://www.furysportscars.co.uk/

Hope that helps David
Treachery and old age will always triumph over youthful enthusiasm.
Top
User avatar
matt_gsxr
Posts: 291
Joined: Tue Jul 14, 2009 2:18 pm
Name: Matthew Robson
Location: Oxford

Re: Need More parts info

Postby matt_gsxr » Mon May 30, 2011 4:37 pm

This ebay seller has them and will ship internationally

Item number: 290464195231
Top
Mullster
Posts: 12
Joined: Sun Nov 07, 2010 7:00 am
Name: Peter

Re: Need More parts info

Postby Mullster » Tue May 31, 2011 10:31 am

Hello Matt,
I have been in contact with the EBAY seller and I believe that item is not the correct one. It is not the replacement for the QR 1774RHT
Any other ideas?

Peter :?
Top
Post Reply

Return to “Jeremy Philips Cars”

Who is online

Users browsing this forum: No registered users and 13 guests