Ok, now I have bought Tom's camera setup, I need to fit a bullet camera or two to the roll bar on my Striker.
What does anyone else recommend as a cheap way of doing this ? Pics would be good.
Thanks,
Pete
Mounting bullet cameras
- petercoll
- Posts: 534
- Joined: Tue Jun 02, 2009 9:51 pm
- Name: Peter Collingridge
- Location: Shropshire
-
- Posts: 2605
- Joined: Wed Jul 01, 2009 12:31 pm
- Name: Jeff Wiltshire
Re: Mounting bullet cameras
The cheapest way to do it is tiewraps....however there are a number of options here http://www.dogcamsport.co.uk/roll-bar-cage-mounts.htm
- David
- Posts: 767
- Joined: Thu Jul 09, 2009 4:43 pm
- Name: David Hussey
- Location: Woodbridge, Suffolk
- Contact:
Re: Mounting bullet cameras
Peter
I have the Dogcam mount but don't use it. It looks too easy to knock out of alignment and projects the camera so far forward that I'm afraid of shake or (worse still) catching it with my helmet. Instead I use a large jubilee clip around the roll-over bar to hold a small jubilee clip round the camera. Both camera and bar are protected from the clip by thin (3mm) rubber. Result is DVD quality stable. YouTube sized example can be found at http://www.youtube.com/watch?v=L3sx02chvtY
HTH
David
I have the Dogcam mount but don't use it. It looks too easy to knock out of alignment and projects the camera so far forward that I'm afraid of shake or (worse still) catching it with my helmet. Instead I use a large jubilee clip around the roll-over bar to hold a small jubilee clip round the camera. Both camera and bar are protected from the clip by thin (3mm) rubber. Result is DVD quality stable. YouTube sized example can be found at http://www.youtube.com/watch?v=L3sx02chvtY
HTH
David
Se7en Pervert -- by definition; I don't drive a Caterham
- petercoll
- Posts: 534
- Joined: Tue Jun 02, 2009 9:51 pm
- Name: Peter Collingridge
- Location: Shropshire
Re: Mounting bullet cameras
Thanks David,
I am going for a simple approach like you describe, perhaps with an exhaust clamp.
Will post some pics in due course, but haven't managed to get to the car properly in this "fresh" weather.
Pete
I am going for a simple approach like you describe, perhaps with an exhaust clamp.
Will post some pics in due course, but haven't managed to get to the car properly in this "fresh" weather.
Pete
- petercoll
- Posts: 534
- Joined: Tue Jun 02, 2009 9:51 pm
- Name: Peter Collingridge
- Location: Shropshire
Re: Mounting bullet cameras
Currently working on something similar to the approach my brother has taken here.
Pete
Pete
- David
- Posts: 767
- Joined: Thu Jul 09, 2009 4:43 pm
- Name: David Hussey
- Location: Woodbridge, Suffolk
- Contact:
Re: Mounting bullet cameras
Peter
Mount shown is undoubtedly beautiful -- but not easy to adjust in the vertical rotational plane.
Also, wrt the position of your brother's cam -- after much experimentation, I've decided that a mount central in the car at around driver's eye height (cross brace or underneath roll-over bar) produces the most compelling video. You can see driver movements, gear changes, shift lights, and (possibly even) instruments in addition to the track. On a se7en you can possibly also see the front wheels.
HTH
Mount shown is undoubtedly beautiful -- but not easy to adjust in the vertical rotational plane.
Also, wrt the position of your brother's cam -- after much experimentation, I've decided that a mount central in the car at around driver's eye height (cross brace or underneath roll-over bar) produces the most compelling video. You can see driver movements, gear changes, shift lights, and (possibly even) instruments in addition to the track. On a se7en you can possibly also see the front wheels.
HTH
Se7en Pervert -- by definition; I don't drive a Caterham
-
- Posts: 39
- Joined: Wed Jul 01, 2009 7:41 pm
- Name: Tony lans
Re: Mounting bullet cameras
Maybe to get some vertical rotation on the above mount either use just one of the bolt holes with the clamp or slot both holes in the plate, but I like the idea
- petercoll
- Posts: 534
- Joined: Tue Jun 02, 2009 9:51 pm
- Name: Peter Collingridge
- Location: Shropshire
Re: Mounting bullet cameras
Thanks David.
I intend mounting my bullet cams on the roll bar diagonal brace as you describe - one pointing forward, the other backward.
I have spent 2 hours so far today just trying to get power to the back of the car for this lot - almost there !
Pete
I intend mounting my bullet cams on the roll bar diagonal brace as you describe - one pointing forward, the other backward.
I have spent 2 hours so far today just trying to get power to the back of the car for this lot - almost there !
Pete
David wrote:Peter
Mount shown is undoubtedly beautiful -- but not easy to adjust in the vertical rotational plane.
Also, wrt the position of your brother's cam -- after much experimentation, I've decided that a mount central in the car at around driver's eye height (cross brace or underneath roll-over bar) produces the most compelling video. You can see driver movements, gear changes, shift lights, and (possibly even) instruments in addition to the track. On a se7en you can possibly also see the front wheels.
HTH
Return to “Jeremy Philips Cars”
Who is online
Users browsing this forum: No registered users and 120 guests