Hi,
Does anyone know where I can get a 10" long bolt for the rear lower wishbone? I have searched the net and plenty are available in the states but the only UK source I can find will make them to order and I have to buy 10, but if that is the answer then that is what I shall do.
I need to replace the current stud with a nut each end to get 13" wheels to clear, I have ground so much off the forward nut that I am worried about the nut holding, hence the search for a bolt.
Regards,
Martin
Rear wishbone bottom bolt
-
- Posts: 56
- Joined: Thu Nov 24, 2016 2:30 pm
- Name: Martin
- Location: Southampton
- adithorp
- Posts: 1200
- Joined: Thu Jul 02, 2009 8:26 am
- Name: adrian thorp
- Location: Hyde, Manchester
Re: Rear wishbone bottom bolt
Might be worth a call to Steve at Fury. He supplied long bolts to go with my modified Fury rear uprights.
-
- Posts: 76
- Joined: Sat Jul 04, 2009 10:28 pm
- Name: Keith Dempsie
- Location: Aberdeen
Re: Rear wishbone bottom bolt
I think these are the guys Sylva used in past.
https://www.spaldingfasteners.co.uk/met ... ank-m12-1/
https://www.spaldingfasteners.co.uk/met ... ank-m12-1/
-
- Posts: 56
- Joined: Thu Nov 24, 2016 2:30 pm
- Name: Martin
- Location: Southampton
Re: Rear wishbone bottom bolt
adithorp wrote:Might be worth a call to Steve at Fury. He supplied long bolts to go with my modified Fury rear uprights.
Thanks, called him but he only has them in 12mm not 1/2"
-
- Posts: 56
- Joined: Thu Nov 24, 2016 2:30 pm
- Name: Martin
- Location: Southampton
Re: Rear wishbone bottom bolt
kdempsie wrote:I think these are the guys Sylva used in past.
https://www.spaldingfasteners.co.uk/met ... ank-m12-1/
Thanks, called them but 8" max length
Return to “Jeremy Philips Cars”
Who is online
Users browsing this forum: No registered users and 6 guests