Phoenix fettling

For general chat, questions etc about cars designed by JP - the main forum
Post Reply
jeffw
Posts: 2605
Joined: Wed Jul 01, 2009 12:31 pm
Name: Jeff Wiltshire

Re: Phoenix fettling

Postby jeffw » Thu Feb 04, 2016 7:26 am

Or 4 !

Having said that I've not seen the bit they took out yet !
Top
User avatar
The Baron
Posts: 111
Joined: Thu Sep 20, 2012 2:57 pm
Name: Richard Greenwood
Location: Doncaster

Re: Phoenix fettling

Postby The Baron » Thu Feb 04, 2016 11:01 am

I've still not cut my old style one piece bonnet for the Striker in two yet as I'm scared to death of it!
Regards Richard
Richard Greenwood@rgsprinting
Top
User avatar
MattD
Posts: 158
Joined: Wed Jul 01, 2009 11:07 pm
Name: Matt Downes
Location: Liphook, Hampshire, UK

Re: Phoenix fettling

Postby MattD » Fri Feb 05, 2016 12:22 am

jeffw wrote:Almost all, the rest is coming from Plays Kool. The ARB is similar to the one Ady has and it took me ages to find.

There are currently some Lola ones on ebay.com

http://www.ebay.com/sch/i.html?_odkw=In ... r&_sacat=0


Thanks Jeff, bought one of the single blade ones.
Surprisingly cheap.

Very nearly got this twin blade...
http://m.ebay.co.uk/itm/111893084934?_m ... noapp=true
Top
jeffw
Posts: 2605
Joined: Wed Jul 01, 2009 12:31 pm
Name: Jeff Wiltshire

Re: Phoenix fettling

Postby jeffw » Fri Feb 05, 2016 11:54 am

That twin one looks much better than mine !
Top
User avatar
MattD
Posts: 158
Joined: Wed Jul 01, 2009 11:07 pm
Name: Matt Downes
Location: Liphook, Hampshire, UK

Re: Phoenix fettling

Postby MattD » Fri Feb 05, 2016 12:54 pm

jeffw wrote:That twin one looks much better than mine !


11" Wide & tall so difficult to mount sensibly. Cross tube/3rd spring is part of the frame, so simple pushrods to the rocker inners.
And as we don't know the actual ARB open/closed effective spring rates was concerned it may be too stiff overall.
Rear fitment maybe.

But this one I found after my purchase is very compact & looks a whole lot better suited..... currently $99/£68, plus the shipping & customs tax.
http://www.ebay.co.uk/itm/252275899765? ... EBIDX%3AIT
Top
jeffw
Posts: 2605
Joined: Wed Jul 01, 2009 12:31 pm
Name: Jeff Wiltshire

Re: Phoenix fettling

Postby jeffw » Fri Feb 05, 2016 4:43 pm

Fully soft you can twist my blade ARB with your hand so I doubt it will be too hard.
Top
User avatar
peter030371
Posts: 451
Joined: Wed Jul 01, 2009 1:37 pm
Name: Peter Smith
Location: Hawkhurst

Re: Phoenix fettling

Postby peter030371 » Fri Feb 05, 2016 8:59 pm

I must be very stupid....I have looked several times on ebay and never been able to find the ARB units, followed the links on this topic and found several more! Time to get my tape measure out and do a bit of head scratching to see what will fit where ;)
Editor of 'The Proper Job'
Top
jeffw
Posts: 2605
Joined: Wed Jul 01, 2009 12:31 pm
Name: Jeff Wiltshire

Re: Phoenix fettling

Postby jeffw » Fri Feb 05, 2016 9:25 pm

Bits starting to arrive for phase 2

Image
Image
Image
Image
Image
Top
User avatar
dopdog
Posts: 934
Joined: Tue May 04, 2010 6:50 am
Name: Simon Boulter
Location: Oxfordshire

Re: Phoenix fettling

Postby dopdog » Sat Feb 06, 2016 10:47 am

Is there Room for anymore bits :D
Top
jeffw
Posts: 2605
Joined: Wed Jul 01, 2009 12:31 pm
Name: Jeff Wiltshire

Re: Phoenix fettling

Postby jeffw » Sat Feb 06, 2016 1:06 pm

It is running out....!
Top
Post Reply

Return to “Jeremy Philips Cars”

Who is online

Users browsing this forum: No registered users and 5 guests