Pro Race Wheel Dims

For general chat, questions etc about cars designed by JP - the main forum
Post Reply
kdempsie
Posts: 76
Joined: Sat Jul 04, 2009 10:28 pm
Name: Keith Dempsie
Location: Aberdeen

Pro Race Wheel Dims

Postby kdempsie » Fri Oct 09, 2015 8:37 pm

Tom, something odd is happening with my outbox messages.

Hopefully you get this.

Tom,

The inside size of the 13" pro race 1.2 wheels are diameter 320mm at the inner edge (nearest the centreline of the car if that makes sense?), this tapers to approximately diameter of 312mm over a distance of 120mm, there is then a chamfer of about 20mm x 20mm before it gets to the back of the spokes.

Hope that gives you what you need.

Keith.
Top
w4lrus
Posts: 19
Joined: Tue May 29, 2012 8:39 am
Name: Tom Hyland
Location: Compton, Berks
Contact:
Contact w4lrus

Re: Pro Race Wheel Dims

Postby w4lrus » Fri Oct 09, 2015 10:14 pm

Hey Keith, thanks for the info - I got 3 PMs from you, but 2 were marked as deleted?
Top
Post Reply

Return to “Jeremy Philips Cars”

Who is online

Users browsing this forum: No registered users and 9 guests