Crossflow Alternator Adjustable Bracket new £14 inc P&P
Posted: Fri Dec 28, 2012 11:04 am
Knocked a few of these up for folk after they expressed an interest in the one I made for my own car, see thread on Locost Builders
http://www.locostbuilders.co.uk/forum/9 ... tid=177204
forum members £14 by bank transfer, or £14.60 by paypal, posted out 1st class recorded, hopefully within 2 days of receiving funds
or £18 off me on ebay
listing detail below
Adjustable link to replace the slotted bracket used by ford as standard on the crossflow in RWD applications in Escorts and kit cars for track, race and rally. Seen in the second picture fitted to a crossflow fitted with a stock water pump and crank pulley with an 800mm belt.
Alloys easy and accurate adjustment as one joint is left hand thread and the other right
Measures 98mm centre to centre fully closed and 134mm open (with 10mm of thread engaged- these are effectively in compression when fitted)
Anodised alloy hex bar which is easy to adjust, along with the nuts which require a 13mm spanner. Ends are 8mm
Brand new and despatched recorded delivery to the UK
I have a number of these and they're advertised elsewhere. Other lengths to suit other applications most likely the same price, contact me with your requirements
Auction is for 1 only, consisting of anodised bar, two joints and lock nuts to suit
http://www.locostbuilders.co.uk/forum/9 ... tid=177204
forum members £14 by bank transfer, or £14.60 by paypal, posted out 1st class recorded, hopefully within 2 days of receiving funds
or £18 off me on ebay
listing detail belowAdjustable link to replace the slotted bracket used by ford as standard on the crossflow in RWD applications in Escorts and kit cars for track, race and rally. Seen in the second picture fitted to a crossflow fitted with a stock water pump and crank pulley with an 800mm belt.
Alloys easy and accurate adjustment as one joint is left hand thread and the other right
Measures 98mm centre to centre fully closed and 134mm open (with 10mm of thread engaged- these are effectively in compression when fitted)
Anodised alloy hex bar which is easy to adjust, along with the nuts which require a 13mm spanner. Ends are 8mm
Brand new and despatched recorded delivery to the UK
I have a number of these and they're advertised elsewhere. Other lengths to suit other applications most likely the same price, contact me with your requirements
Auction is for 1 only, consisting of anodised bar, two joints and lock nuts to suit