Page 1 of 1
Wanted - 5" silencer/Spax damper for Striker
Posted: Sat Oct 30, 2010 7:14 pm
by davmce
I bashed in the side of my 5" silencer box at Llandow so looking for a replacement if anyone has one knocking around that they would like to sell on.
Also looking for one Spax damper to fit a live axle striker - one side has failed so rather than buy a new set i thought i would see if anyone else had an odd damper for sale.
Cheers
Re: Wanted - 5" silencer/Spax damper for Striker
Posted: Wed Nov 03, 2010 3:12 pm
by matt_gsxr
what are the specs of the damper that you need?
length, spring i.d.
Matt
Re: Wanted - 5" silencer/Spax damper for Striker
Posted: Wed Nov 03, 2010 8:41 pm
by davmce
Hi Matt
Spring ID is 2.25" and fully open between centres is 13".
Spax ref No is G4031
Cheers
Dave
Re: Wanted - 5" silencer/Spax damper for Striker
Posted: Thu Nov 04, 2010 11:34 am
by matt_gsxr
Sorry can't help,
I have a pair of AVO adjustables in 13inch, but they are for 1.9inch springs, and you would end up swapping too much stuff. I've got some springs too (125, 200 or 275lbs/inch), but not worth the bother changing all this for one damper.
http://lh3.ggpht.com/_qaMpJLtzKC4/TMLjVDPUkJI/AAAAAAAAAbM/SVrVqRQ9RcM/s512/DSC01782.jpgMatt
Re: Wanted - 5" silencer/Spax damper for Striker
Posted: Thu Nov 04, 2010 8:42 pm
by davmce
Cheers Matt
thanks for looking into it.
Re: Wanted - 5" silencer/Spax damper for Striker
Posted: Thu Nov 04, 2010 10:23 pm
by Werner Van Loock
How fast you want the silencer? Mine will be available somewhere january or february. It's the standard 5" (maybe 5.5") raw silencer. I need a silencer that's more quiet than this one. But I'm moving house soon, so don't have much time now. And I live in Belgium, but get to the uk now and then, so if you don't live too far from london.
Re: Wanted - 5" silencer/Spax damper for Striker
Posted: Sun Nov 07, 2010 7:46 pm
by davmce
Cheers Werner, but i need over next few weeks. Think I'll have to get a new one
Re: Wanted - 5" silencer/Spax damper for Striker
Posted: Sat Nov 20, 2010 5:55 pm
by MartinH
Hi,
If you've still not sorted your silencer I have one in the garage roof, standard RAW produced model. If your interested let me know and I'll dig it out and let you have the measurements.
Martin
Re: Wanted - 5" silencer/Spax damper for Striker
Posted: Mon Nov 22, 2010 11:14 pm
by davmce
Martin
Still looking for one. If it is std RAW i'm sure it will be fine but let me know the size and condition anyway and how much you want for it.
Cheers
Dave
P.S. Where are you based?
Re: Wanted - 5" silencer/Spax damper for Striker
Posted: Sun Nov 28, 2010 5:29 pm
by MartinH
Dave
Sorry for the delay in getting back to you, Silencer 6 inches diameter, the can is 22", overall length is 33" and the inlet is for a 2" pipe. Standard RAW type with mountings front and rear originally fitted to a 4A-GE engined Striker. It's used but in good condition with no dents or similar damage according to their website RAW sell these for £140, I'm looking for £80 but give me a call and discuss, I'm on 07714615651.
Location is 8 miles North of Cambridge, a quick check on the Royal Mail website suggests postage will be around £12.
Cheers
Martin
