Page 1 of 1
Phoenix/Fury MSA Rollbar
Posted: Tue Oct 03, 2017 12:51 pm
by jeffw
Made by Fury Sportscars this is MSA compliant Rollbar. Will require fabrication of mounts to fit your car, £200 buyer collects (for obvious reasons).
Re: Phoenix/Fury MSA Rollbar
Posted: Tue Oct 03, 2017 2:33 pm
by peter030371
Is that all that is left now?
Re: Phoenix/Fury MSA Rollbar
Posted: Tue Oct 03, 2017 2:35 pm
by jeffw
No, there are other bits but this was something I'd forgotten about.
Re: Phoenix/Fury MSA Rollbar
Posted: Tue Oct 03, 2017 5:45 pm
by davspeed
Presuming that this would fit or could be made to fit a striker I would be very interested in this.
Re: Phoenix/Fury MSA Rollbar
Posted: Tue Oct 03, 2017 6:30 pm
by martin
jeffw wrote:Made by Fury Sportscars this is MSA compliant Rollbar. Will require fabrication of mounts to fit your car, £200 buyer collects (for obvious reasons).
Hi Jeff,
I am interested if Dave does not take it.
Regards,
Martin
Re: Phoenix/Fury MSA Rollbar
Posted: Tue Oct 03, 2017 7:56 pm
by jeffw
It can be made to fit most things but as it was off a Phoenix the Striker shouldn't be that hard. Fury Sportscar could do it or advise how it was done
Re: Phoenix/Fury MSA Rollbar
Posted: Wed Oct 04, 2017 6:30 pm
by jeffw
Sold to Davspeed
Re: Phoenix/Fury MSA Rollbar
Posted: Thu Apr 26, 2018 7:48 am
by davspeed
Having bought this from Jeff last year I have finally got round to trying to fit it. I found that it is a bit too narrow to look right on the striker, it could be made to fit it but it would bug me too much.
It is also looking less likely that I will want to do any more MSA events so I am putting it up for resale for what I paid for it (£200)
I can take I can take it to Stoneliegh preferably on the Sunday for viewing/collection.
I have measured it as best I could.
Tube diameter o/d 45.28mm
Feet 112x112mm
Outer width of hoop feet 980mm
Outer width of hoop at base 910mm
Hoop height from bottom of feet 415mm
Outer width of rear stays feet 965mm
Outer width of stays at base 880
I have some pictures of it against my striker roll bar for comparison if wanted.