Phoenix/Fury MSA Rollbar
-
- Posts: 2605
- Joined: Wed Jul 01, 2009 12:31 pm
- Name: Jeff Wiltshire
Phoenix/Fury MSA Rollbar
Made by Fury Sportscars this is MSA compliant Rollbar. Will require fabrication of mounts to fit your car, £200 buyer collects (for obvious reasons).
- peter030371
- Posts: 449
- Joined: Wed Jul 01, 2009 1:37 pm
- Name: Peter Smith
- Location: Hawkhurst
-
- Posts: 2605
- Joined: Wed Jul 01, 2009 12:31 pm
- Name: Jeff Wiltshire
Re: Phoenix/Fury MSA Rollbar
No, there are other bits but this was something I'd forgotten about.
-
- Posts: 38
- Joined: Wed Sep 21, 2016 1:03 pm
- Name: david van gils
- Location: North Lincs
Re: Phoenix/Fury MSA Rollbar
Presuming that this would fit or could be made to fit a striker I would be very interested in this.
-
- Posts: 56
- Joined: Thu Nov 24, 2016 2:30 pm
- Name: Martin
- Location: Southampton
Re: Phoenix/Fury MSA Rollbar
jeffw wrote:Made by Fury Sportscars this is MSA compliant Rollbar. Will require fabrication of mounts to fit your car, £200 buyer collects (for obvious reasons).
Hi Jeff,
I am interested if Dave does not take it.
Regards,
Martin
-
- Posts: 2605
- Joined: Wed Jul 01, 2009 12:31 pm
- Name: Jeff Wiltshire
Re: Phoenix/Fury MSA Rollbar
It can be made to fit most things but as it was off a Phoenix the Striker shouldn't be that hard. Fury Sportscar could do it or advise how it was done
-
- Posts: 2605
- Joined: Wed Jul 01, 2009 12:31 pm
- Name: Jeff Wiltshire
Re: Phoenix/Fury MSA Rollbar
Sold to Davspeed
-
- Posts: 38
- Joined: Wed Sep 21, 2016 1:03 pm
- Name: david van gils
- Location: North Lincs
Re: Phoenix/Fury MSA Rollbar
Having bought this from Jeff last year I have finally got round to trying to fit it. I found that it is a bit too narrow to look right on the striker, it could be made to fit it but it would bug me too much.
It is also looking less likely that I will want to do any more MSA events so I am putting it up for resale for what I paid for it (£200)
I can take I can take it to Stoneliegh preferably on the Sunday for viewing/collection.
I have measured it as best I could.
Tube diameter o/d 45.28mm
Feet 112x112mm
Outer width of hoop feet 980mm
Outer width of hoop at base 910mm
Hoop height from bottom of feet 415mm
Outer width of rear stays feet 965mm
Outer width of stays at base 880
I have some pictures of it against my striker roll bar for comparison if wanted.
It is also looking less likely that I will want to do any more MSA events so I am putting it up for resale for what I paid for it (£200)
I can take I can take it to Stoneliegh preferably on the Sunday for viewing/collection.
I have measured it as best I could.
Tube diameter o/d 45.28mm
Feet 112x112mm
Outer width of hoop feet 980mm
Outer width of hoop at base 910mm
Hoop height from bottom of feet 415mm
Outer width of rear stays feet 965mm
Outer width of stays at base 880
I have some pictures of it against my striker roll bar for comparison if wanted.
Who is online
Users browsing this forum: No registered users and 4 guests