Phoenix/Fury MSA Rollbar

Post your "For Sale" or "Wanted" ads here. No commercial sales please.
jeffw
Posts: 2605
Joined: Wed Jul 01, 2009 12:31 pm
Name: Jeff Wiltshire

Phoenix/Fury MSA Rollbar

Postby jeffw » Tue Oct 03, 2017 12:51 pm

Made by Fury Sportscars this is MSA compliant Rollbar. Will require fabrication of mounts to fit your car, £200 buyer collects (for obvious reasons).

User avatar
peter030371
Posts: 447
Joined: Wed Jul 01, 2009 1:37 pm
Name: Peter Smith
Location: Hawkhurst

Re: Phoenix/Fury MSA Rollbar

Postby peter030371 » Tue Oct 03, 2017 2:33 pm

Is that all that is left now?
Editor of 'The Proper Job'

jeffw
Posts: 2605
Joined: Wed Jul 01, 2009 12:31 pm
Name: Jeff Wiltshire

Re: Phoenix/Fury MSA Rollbar

Postby jeffw » Tue Oct 03, 2017 2:35 pm

No, there are other bits but this was something I'd forgotten about.

davspeed
Posts: 38
Joined: Wed Sep 21, 2016 1:03 pm
Name: david van gils
Location: North Lincs

Re: Phoenix/Fury MSA Rollbar

Postby davspeed » Tue Oct 03, 2017 5:45 pm

Presuming that this would fit or could be made to fit a striker I would be very interested in this.

martin
Posts: 56
Joined: Thu Nov 24, 2016 2:30 pm
Name: Martin
Location: Southampton

Re: Phoenix/Fury MSA Rollbar

Postby martin » Tue Oct 03, 2017 6:30 pm

jeffw wrote:Made by Fury Sportscars this is MSA compliant Rollbar. Will require fabrication of mounts to fit your car, £200 buyer collects (for obvious reasons).


Hi Jeff,

I am interested if Dave does not take it.

Regards,

Martin

jeffw
Posts: 2605
Joined: Wed Jul 01, 2009 12:31 pm
Name: Jeff Wiltshire

Re: Phoenix/Fury MSA Rollbar

Postby jeffw » Tue Oct 03, 2017 7:56 pm

It can be made to fit most things but as it was off a Phoenix the Striker shouldn't be that hard. Fury Sportscar could do it or advise how it was done

jeffw
Posts: 2605
Joined: Wed Jul 01, 2009 12:31 pm
Name: Jeff Wiltshire

Re: Phoenix/Fury MSA Rollbar

Postby jeffw » Wed Oct 04, 2017 6:30 pm

Sold to Davspeed

davspeed
Posts: 38
Joined: Wed Sep 21, 2016 1:03 pm
Name: david van gils
Location: North Lincs

Re: Phoenix/Fury MSA Rollbar

Postby davspeed » Thu Apr 26, 2018 7:48 am

Having bought this from Jeff last year I have finally got round to trying to fit it. I found that it is a bit too narrow to look right on the striker, it could be made to fit it but it would bug me too much.

It is also looking less likely that I will want to do any more MSA events so I am putting it up for resale for what I paid for it (£200)
I can take I can take it to Stoneliegh preferably on the Sunday for viewing/collection.

I have measured it as best I could.

Tube diameter o/d 45.28mm
Feet 112x112mm
Outer width of hoop feet 980mm
Outer width of hoop at base 910mm
Hoop height from bottom of feet 415mm
Outer width of rear stays feet 965mm
Outer width of stays at base 880

I have some pictures of it against my striker roll bar for comparison if wanted.


Return to “For Sale / Wanted”

Who is online

Users browsing this forum: No registered users and 5 guests