Page 9 of 10

Re: JPSC Trackday - Llandow - Sat 15th May 2010

Posted: Sun May 16, 2010 9:09 am
by petercoll
Found this photo (crap colours - iPhone camera does not like bright sunshine).

This was OMEXs Striker, with a 350bhp (!!!) s/c Zetec. The prototype setup resulted in the supercharger belt snapping after a few laps.

Pete

Image

Re: JPSC Trackday - Llandow - Sat 15th May 2010

Posted: Sun May 16, 2010 12:36 pm
by adithorp
Don't think the belt realy broke. A better description would be melted through!

adrian

Re: JPSC Trackday - Llandow - Sat 15th May 2010

Posted: Sun May 16, 2010 1:22 pm
by petercoll
Just been out in the Striker to make sure everything still works as it should, and is securely in place (lights, exhaust, wheel nuts, fuel tank :mrgreen: etc).

I noticed that the oil level had dropped more than is healthy - did anyone spot my car burning oil during the day ? It is certainly leaking it a fair bit, but I can live with that.

Cheers,

Pete

Re: JPSC Trackday - Llandow - Sat 15th May 2010

Posted: Sun May 16, 2010 2:21 pm
by AndyHamp
There was a little puff, when you lifted off for the Bus Stop .... but not significant IMHO

Re: JPSC Trackday - Llandow - Sat 15th May 2010

Posted: Sun May 16, 2010 2:33 pm
by jeffw
Was the supercharged Striker getting hot ? Would have liked to seen engine that as it would fit into my Phoenix ... :)

Re: JPSC Trackday - Llandow - Sat 15th May 2010

Posted: Sun May 16, 2010 3:01 pm
by adithorp
It did a couple of laps before starting to overheat. It's got the 1lt polo rad in and it's not big enough.

It was lighting the tyres up at 100mph in the back strieght! :o

adrian

Re: JPSC Trackday - Llandow - Sat 15th May 2010

Posted: Sun May 16, 2010 3:38 pm
by jeffw
:)

Wonder how much the conversion is :)

Re: JPSC Trackday - Llandow - Sat 15th May 2010

Posted: Mon May 17, 2010 10:53 am
by The Knobs
good fun day, roll on the next oned.

Re: JPSC Trackday - Llandow - Sat 15th May 2010

Posted: Mon May 17, 2010 11:17 am
by AndyHamp
jeffw wrote::)

Wonder how much the conversion is :)


I think it cost me around the 3K mark to S/C the Mazda lump. The Omex one was similar but i think he'd done quite a bit on the Engine too. So not cheap.

Andy

Re: JPSC Trackday - Llandow - Sat 15th May 2010

Posted: Mon May 17, 2010 3:27 pm
by matt_gsxr
so 3k for a working one, more for one that doesn't work and eats belts.
I think I know which I would choose.