Page 1 of 1
Phoenix Shocks
Posted: Thu Jul 16, 2009 1:01 pm
by jeffw
Guys
Anyone know what the diameter and open length of the standard shocks fitted to a square-tube Phoenix would be ?
Thanks
Re: Phoenix Shocks
Posted: Fri Jul 17, 2009 5:32 pm
by jeffw
No one know ?
Re: Phoenix Shocks
Posted: Thu Jul 30, 2009 9:58 am
by jeffw
Apparently not....
Re: Phoenix Shocks
Posted: Tue Sep 08, 2009 11:34 pm
by Lee Champion
Hi. I just ordered a new set from Protech, think they were 12" open 9" closed. They have the specs on file. BUT I changed the top-eyes on the rear to give me an extra inch, so mine are 13" open at the rear. I could not get 1/2 rake without this as I run 14" wheels and as such have to run the front slightly higher to clear the headlight bowls. Good shocks so far.
Re: Phoenix Shocks
Posted: Wed Sep 09, 2009 6:13 am
by jeffw
Interesting as I have 12" open all round and am still able to clear the headlight bowls and run 25mm rake.
Re: Phoenix Shocks
Posted: Wed Sep 09, 2009 9:35 pm
by Lee Champion
My Chassis is probobly bent
Re: Phoenix Shocks
Posted: Wed Sep 09, 2009 9:55 pm
by jeffw
Doubt it mate
Mine is old (1996) so there may well be differences.