Guys
Anyone know what the diameter and open length of the standard shocks fitted to a square-tube Phoenix would be ?
Thanks
Phoenix Shocks
-
- Posts: 2605
- Joined: Wed Jul 01, 2009 12:31 pm
- Name: Jeff Wiltshire
Re: Phoenix Shocks
No one know ?
-
- Posts: 2605
- Joined: Wed Jul 01, 2009 12:31 pm
- Name: Jeff Wiltshire
Re: Phoenix Shocks
Apparently not....
-
- Posts: 56
- Joined: Thu Jul 02, 2009 9:14 am
- Name: Lee Champion
Re: Phoenix Shocks
Hi. I just ordered a new set from Protech, think they were 12" open 9" closed. They have the specs on file. BUT I changed the top-eyes on the rear to give me an extra inch, so mine are 13" open at the rear. I could not get 1/2 rake without this as I run 14" wheels and as such have to run the front slightly higher to clear the headlight bowls. Good shocks so far.
-
- Posts: 2605
- Joined: Wed Jul 01, 2009 12:31 pm
- Name: Jeff Wiltshire
Re: Phoenix Shocks
Interesting as I have 12" open all round and am still able to clear the headlight bowls and run 25mm rake.
-
- Posts: 56
- Joined: Thu Jul 02, 2009 9:14 am
- Name: Lee Champion
Re: Phoenix Shocks
My Chassis is probobly bent
-
- Posts: 2605
- Joined: Wed Jul 01, 2009 12:31 pm
- Name: Jeff Wiltshire
Re: Phoenix Shocks
Doubt it mate
Mine is old (1996) so there may well be differences.
Mine is old (1996) so there may well be differences.
Return to “Jeremy Philips Cars”
Who is online
Users browsing this forum: No registered users and 6 guests