Show me your electric reverse!
Posted: Fri Jul 10, 2009 8:29 pm
I'm trying to gather information on an electric reverse system for my R1 Fury build, but have found photos/specs/suppliers of such systems hard to come by.
Since this is something all builders of road going BECs are going to have to consider, (unless they down the Quafie or MNR reverse box route), I thought it would be a good idea to start a thread to try and gather some info on how people have managed this in the past. If I'm right in thinking a rudimentary reverse is a requirement for the RGB series, then there must be a fair few cars with a starter motor reverse installed!
I'll probably remove the reverse post IVA to save some weight and recoup some of the cost. I'd imagine many BEC Fury builders will do the same, so perhaps BGH will offer a Rent-A-Reverse system sometime in the future!
Cheers,
Jek
Since this is something all builders of road going BECs are going to have to consider, (unless they down the Quafie or MNR reverse box route), I thought it would be a good idea to start a thread to try and gather some info on how people have managed this in the past. If I'm right in thinking a rudimentary reverse is a requirement for the RGB series, then there must be a fair few cars with a starter motor reverse installed!
I'll probably remove the reverse post IVA to save some weight and recoup some of the cost. I'd imagine many BEC Fury builders will do the same, so perhaps BGH will offer a Rent-A-Reverse system sometime in the future!
Cheers,
Jek