I have recently purchased a Stuart Talor Phoenix with a ZZR1100 engine. The car was factory built. The clutch fluid is going down over a period of driving. The master cylinder looks as if it is a rear motorcycle brake master cylinder. There is a 14mm diameter mark on the casting. Does anyone know where these came from?
Regards, Jon
Stuart Talor BEC clutch master cylinder
-
- Posts: 3
- Joined: Fri Apr 30, 2021 2:09 pm
- Name: Jonathan Gaines
- adithorp
- Posts: 1198
- Joined: Thu Jul 02, 2009 8:26 am
- Name: adrian thorp
- Location: Hyde, Manchester
Re: Stuart Talor BEC clutch master cylinder
Probably from the bike. I've changed one for a mate with a Blackbird engined MK and his was from the bike. Think I found one on eBay.
I think BUSAs also have a 14mm rear brake master cylinder.
I think BUSAs also have a 14mm rear brake master cylinder.
Return to “Jeremy Philips Cars”
Who is online
Users browsing this forum: No registered users and 4 guests