JPSC Forum

A dedicated forum for discussion on all things relating to Jeremy Phillips designed cars. Including the Star, Leader, Striker, Phoenix, Fury, Jester, Stylus, Mojo, Riot and the Full Bodied Riot.
http://jpsc.org.uk/forum/

Stuart Talor BEC clutch master cylinder

http://jpsc.org.uk/forum/viewtopic.php?f=4&t=1946

Page 1 of 1

Stuart Talor BEC clutch master cylinder

Posted: Fri Apr 30, 2021 5:57 pm
by John G
I have recently purchased a Stuart Talor Phoenix with a ZZR1100 engine. The car was factory built. The clutch fluid is going down over a period of driving. The master cylinder looks as if it is a rear motorcycle brake master cylinder. There is a 14mm diameter mark on the casting. Does anyone know where these came from?
Regards, Jon

Re: Stuart Talor BEC clutch master cylinder

Posted: Sun May 02, 2021 7:18 pm
by adithorp
Probably from the bike. I've changed one for a mate with a Blackbird engined MK and his was from the bike. Think I found one on eBay.

I think BUSAs also have a 14mm rear brake master cylinder.
All times are UTC+01:00
Page 1 of 1
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/