Striker BEC conversion
Posted: Mon Oct 01, 2018 12:04 pm
I thought as I have had this car for nearly two years and it is getting there I had better share a few pictures. There is still work to do, mainly tidying up and redoing jobs I'm not happy with, the main one being the paint as I was doing it during the heatwave and had lots of problems.
When I got it with an unrun 1700cc crosflow in it.
20161012_171403 by david.vangils, on Flickr
What was going in a 2007 CBR1000RR Fireblade.
20161031_160027 by david.vangils, on Flickr
20161031_160017 by david.vangils, on Flickr
Crossflow was here.
20170323_101449 by david.vangils, on Flickr
CBR1000rr in.
20170809_161633 by david.vangils, on Flickr
20170809_161913 by david.vangils, on Flickr
I decided to fit a new three piece rear end as the old one had damage and wasn't really wide enough.
20180418_164948 by david.vangils, on Flickr
20180420_132119 by david.vangils, on Flickr
20180510_144127 by david.vangils, on Flickr
20180510_144143 by david.vangils, on Flickr
My makeshift paint booth.
20180725_094526 by david.vangils, on Flickr
Engine in and running, I will re wire the engine loom shortly to move the ECU to the bulkhead and tidy it up. I wanted to make sure it ran before chopping it about too much.
20180927_152409 by david.vangils, on Flickr
20180927_152426 by david.vangils, on Flickr
20180927_152435 by david.vangils, on Flickr
20180927_152448 by david.vangils, on Flickr
20180927_151323 by david.vangils, on Flickr
20180927_151432 by david.vangils, on Flickr
20180927_151352 by david.vangils, on Flickr
When I got it with an unrun 1700cc crosflow in it.
20161012_171403 by david.vangils, on Flickr
What was going in a 2007 CBR1000RR Fireblade.
20161031_160027 by david.vangils, on Flickr
20161031_160017 by david.vangils, on Flickr
Crossflow was here.
20170323_101449 by david.vangils, on Flickr
CBR1000rr in.
20170809_161633 by david.vangils, on Flickr
20170809_161913 by david.vangils, on Flickr
I decided to fit a new three piece rear end as the old one had damage and wasn't really wide enough.
20180418_164948 by david.vangils, on Flickr
20180420_132119 by david.vangils, on Flickr
20180510_144127 by david.vangils, on Flickr
20180510_144143 by david.vangils, on Flickr
My makeshift paint booth.
20180725_094526 by david.vangils, on Flickr
Engine in and running, I will re wire the engine loom shortly to move the ECU to the bulkhead and tidy it up. I wanted to make sure it ran before chopping it about too much.
20180927_152409 by david.vangils, on Flickr
20180927_152426 by david.vangils, on Flickr
20180927_152435 by david.vangils, on Flickr
20180927_152448 by david.vangils, on Flickr
20180927_151323 by david.vangils, on Flickr
20180927_151432 by david.vangils, on Flickr
20180927_151352 by david.vangils, on Flickr