JPSC Forum

Rather than completely hijack peters thread I thought I'd post more update pictures here.

The remains of the temporary airbox. Although the long cut to the corner I did to access a stuck screw there's plenty of other cracks (Inc under the gaffer)...



Latest pictures with just final trim of the top edges and securing screw holes to drill... And cut a hole in the bonnet!





The lid didn't come out of the mold looking too good so it got a couple of coats of resin brushed on and then lots of rubbing down and it's looking ok now... Well the bit that'll show is.

Very nice

Doing the scary bit now... Cutting a cooking big hole in the bonnet!

adithorp wrote:Doing the scary bit now... Cutting a cooking big hole in the bonnet!

Start small and make it bigger (said the actress to the bishop), scary but worked for me

What method did you use? Is it wet lay?

Yes it's just wet lay.

Got the hole cut. I had to make it with a gap at the back otherwise it was a pain to open the bonnet. Shame but it had to be or it'd be a 2man job to open.



Just need to test drive now.

Like that Adi . Nice work.

Looks very neat

Probably looks better in photos than reality.

adithorp wrote:Probably looks better in photos than reality.

Next time I see you I promise not to stare