Page 1 of 1
Phoenix steering column
Posted: Sun Nov 08, 2015 10:07 pm
by Arkwright
Hi guys does anyone know what steering column was used in the early Phoenix I need to fit a quick release hub, Thanks in advance.
Re: Phoenix steering column
Posted: Mon Nov 09, 2015 3:37 pm
by RobMsport
Arkwright wrote:Hi guys does anyone know what steering column was used in the early Phoenix I need to fit a quick release hub, Thanks in advance.
Jeff will probably answer you for certain but if yours is an early car then I think it'll be an Escort M1 or M2.
Re: Phoenix steering column
Posted: Mon Nov 09, 2015 5:54 pm
by adithorp
That'd be my guess. The alternative might be Sierra which would be a hex fitting for the wheel and a triangle at the bottom. Escort will be splines both ends.
Re: Phoenix steering column
Posted: Mon Nov 09, 2015 6:46 pm
by dopdog
you see no one listens to me, pictures tell a thousand words!
Re: Phoenix steering column
Posted: Mon Nov 09, 2015 7:41 pm
by jeffw
Mine is Escort. Mind you I don't see why that makes a difference if you are fitting a slug to take a quick release wheel mount.
Re: Phoenix steering column
Posted: Tue Nov 10, 2015 6:58 pm
by Arkwright
Thanks guys I now believe its a Sierra. I presume a slug is a weld on ? I was going to bolt it on as it can be changed or swapped to another car later.
Re: Phoenix steering column
Posted: Fri Nov 13, 2015 12:12 pm
by micha
hmmmm...early sylva phoenix never came with sierra parts
you are talking about a sylva phoenix from 1990 or so?
Re: Phoenix steering column
Posted: Wed Nov 18, 2015 10:09 pm
by Arkwright
It was hexagon fitment thanks for the advice guys.