Basic parts identification

For general chat, questions etc about cars designed by JP - the main forum
User avatar
Taff Striker
Posts: 84
Joined: Mon Jul 05, 2010 5:56 pm
Name: Richard Jones
Location: Wild West Wales

Basic parts identification

Postby Taff Striker » Thu Jul 15, 2010 5:57 pm

I'm affraid I have to start somewhere and its as simple as this :oops:

Am I correct in thinking this is a Sierra upright and if so I should carry out the mod to the lever arm to get the castor right?

Image

Is this an escort or cortina hub as I may well change to alloy ones(and possibly even go back to solid discs :? )

Image

Finally any significance to these numbers stamped into the frame ?

Image

Thanks in advance

Rich ;)

User avatar
sjmatthews
Posts: 33
Joined: Mon Jun 14, 2010 7:45 pm
Name: Steve Matthews
Location: Cotswolds

Re: Basic parts identification

Postby sjmatthews » Thu Jul 15, 2010 6:07 pm

Hi

I'd say they're cortina uprights and hubs. Could the markings be your chassis/VIN number?

Stev
I'll be in the garage dear!

pkuzan
Posts: 8
Joined: Wed Jul 01, 2009 2:54 pm
Name: Paul Kuzan

Re: Basic parts identification

Postby pkuzan » Thu Jul 15, 2010 8:12 pm

Hi,

They are modified MK2 Escort uprights. There is no need to change anything as the stub axle is on the kingpin axis (a line drawn between the upper and lower ball joints). The Sierra uprights have the stub axles offset forward making it very hard to get sufficient trail.

Cortina uprights are a single casting. Capri uprights have bolt-on steering arms.

The hubs will be MK2 Escort too.

The upper ball joints are Chevette and an Escort track control arm is used at the bottom. Must be a fairly early chassis as we did not do this arrangement for long; the lower TCA was replaced by a fabricated wishbone and a Sherpa ball joint.

The number is not a Sylva chassis number. Could have been issued by VRO?

All the best,
Paul

User avatar
Taff Striker
Posts: 84
Joined: Mon Jul 05, 2010 5:56 pm
Name: Richard Jones
Location: Wild West Wales

Re: Basic parts identification

Postby Taff Striker » Thu Jul 15, 2010 8:39 pm

Wow, thanks guys 8-)

Paul,I have the original purchase invoice which is dated the 6th of April 1994 and the chassis number is S90130 and also dated 1994. The V5 uses the S90130 as the chassis/vin number. The kit was originally sold to the Northumberland area so the SART of the "chassis" number may well relate in some way to a VRO in that area :?

A pair of the fabricated wishbones came with the car so will be fitted over the winter period :D

Thanks again, Rich ;)

micha
Posts: 120
Joined: Thu Jan 06, 2011 6:41 pm
Name: Micha mertens

Re: Basic parts identification

Postby micha » Sat Jul 07, 2012 12:14 pm

it a very old posting but such a chassis number is often used with kitcars where parts came from unkown origin, donor car was accidant damaged and written off etc.

e.g.: the majority of robinhood kitars from the 90ies have such a SABTVR number. have also seen caterhams or even TVR´s with such a number

also mass-production cars, which got re-shelled after an accidant will be issued which such a number.

but very strange that the number is stamped into the chassis and the V5c does not show it.

philfingers
Posts: 123
Joined: Sat Mar 12, 2011 9:34 pm
Name: Phil of course
Location: Kidderminster, Worcestershire, UK

Re: Basic parts identification

Postby philfingers » Fri Nov 23, 2012 12:09 pm

FYI I have a similar SABTVRO************ VIN applied by VRO [vehicle registration office], my Sylva Chassis No is 90185. Car was registered in 1997
See viewtopic.php?f=4&t=936&p=6481#p6481
STM Phoenix R1 IRS Quaiffe reverse & LSD
Sold- Sylva Striker 1660 XF, 40s live axle
Sold- Sylva Phoenix- 1300 XF, 234, 40s live axle.
205 mi16 tarmac rally car, Audi A6 2.7 TDi S-line and a few motorbikes


Return to “Jeremy Philips Cars”

Who is online

Users browsing this forum: No registered users and 20 guests