Page 1 of 2

Lydden 10th May / Debden 11th May

Posted: Wed May 07, 2014 12:42 pm
by jeffw
I see there are some JPSC cars out and about this weekend, Mark Cheevers is running at Lydden in my class :)

Re: Lydden 10th May / Debden 11th May

Posted: Wed May 07, 2014 1:12 pm
by RobMsport
Mark is now running Hyabusa power , 2lt Zetec long gone so shouldn't weigh too much :) It's a very long time since he did a sprint so hope he's all familiar with the sequential bike box.

Re: Lydden 10th May / Debden 11th May

Posted: Wed May 07, 2014 1:32 pm
by dopdog
I'm not going :(

Re: Lydden 10th May / Debden 11th May

Posted: Wed May 07, 2014 6:03 pm
by jeffw
How is your motor ?

Re: Lydden 10th May / Debden 11th May

Posted: Wed May 07, 2014 6:04 pm
by jeffw
RobMsport wrote:Mark is now running Hyabusa power , 2lt Zetec long gone so shouldn't weigh too much :) It's a very long time since he did a sprint so hope he's all familiar with the sequential bike box.


Yeah, he was in my class at Goodwood last year with the Busa in it....

Re: Lydden 10th May / Debden 11th May

Posted: Wed May 07, 2014 6:23 pm
by dopdog
Car looks like it will be as good as finished by the end of the week then I can go and get it in time for good wood on the 17th :D

Re: Lydden 10th May / Debden 11th May

Posted: Wed May 07, 2014 6:27 pm
by jeffw
Well you are on your own on the 17th....I'll be in Wales.

Re: Lydden 10th May / Debden 11th May

Posted: Sun May 11, 2014 9:14 pm
by jeffw
Debden video

http://youtu.be/httDPCIMVUw

Trying a little too hard. Still 2nd in class to Paul Bowden with Nigel very close behind.

Sadly Stephen Laing had a bit of a prang today and did some serious damage to his R500. He was OK but the car will require some work.

Re: Lydden 10th May / Debden 11th May

Posted: Sun May 11, 2014 10:01 pm
by jeffw
And Lydden...very wet with a large number of offs

http://youtu.be/YxNYJ3Xf0MM

Re: Lydden 10th May / Debden 11th May

Posted: Sun May 11, 2014 10:30 pm
by dopdog
I hear Alan blew his new engine up as well so not a good day all round for some