phoenix
- RobMsport
- Posts: 704
- Joined: Thu Jul 02, 2009 2:36 pm
- Name: Rob Farley
- Location: Aston Clinton , BUCKS
Re: phoenix
With lower pressure on hot Tracks I´ve got strange uneven wear on the hardest used Tires. If strange --- which tyres -- front/rear and what wear pattern -- why strange
-
- Posts: 30
- Joined: Sat Sep 17, 2011 10:28 pm
- Name: Michael Jochner
Re: phoenix
xxxxxxxxxxxxxxxxxxx
Last edited by phoenix on Thu Oct 27, 2022 8:52 pm, edited 2 times in total.
- RobMsport
- Posts: 704
- Joined: Thu Jul 02, 2009 2:36 pm
- Name: Rob Farley
- Location: Aston Clinton , BUCKS
Re: phoenix
I'm surprised that you run 3 degrees neg all round , yet tyre temp's are even across the inner/centre/outer tread but the tyre in your photo has centre wear greater than outer tread. You don't mention inner tyre tread wear
If only the centre tread has higher wear then that would indicate too much pressure , probably around 2 psi . If the inner tread wear is similar to the centre tread wear , then I'd assume too much neg camber -- I'd try 0.5 degree less then work towards the best setting.
Regarding the 3 degrees all round --- what spring rates do you run and is that without anti-rollbars at either front or rear car weight
PM me for email direct chat if it suits .
If only the centre tread has higher wear then that would indicate too much pressure , probably around 2 psi . If the inner tread wear is similar to the centre tread wear , then I'd assume too much neg camber -- I'd try 0.5 degree less then work towards the best setting.
Regarding the 3 degrees all round --- what spring rates do you run and is that without anti-rollbars at either front or rear car weight
PM me for email direct chat if it suits .
-
- Posts: 30
- Joined: Sat Sep 17, 2011 10:28 pm
- Name: Michael Jochner
Re: phoenix
xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Last edited by phoenix on Thu Oct 27, 2022 8:53 pm, edited 1 time in total.
-
- Posts: 2605
- Joined: Wed Jul 01, 2009 12:31 pm
- Name: Jeff Wiltshire
Re: phoenix
Your front springs are very hard, I'm only running 250lb in my Phoenix
- dopdog
- Posts: 934
- Joined: Tue May 04, 2010 6:50 am
- Name: Simon Boulter
- Location: Oxfordshire
Re: phoenix
Wow i ran 210 180 on my striker
- adithorp
- Posts: 1198
- Joined: Thu Jul 02, 2009 8:26 am
- Name: adrian thorp
- Location: Hyde, Manchester
Re: phoenix
Is that last picture the inside edge? Looks like too much camber to me.
-
- Posts: 30
- Joined: Sat Sep 17, 2011 10:28 pm
- Name: Michael Jochner
Re: phoenix
xxxxxxxxxxxxxxx
Who is online
Users browsing this forum: No registered users and 6 guests