Greetings one and all.

Start here if you are new to the forum, and just want to say Hello
Avagolen
Posts: 4
Joined: Thu Jul 02, 2009 7:14 am
Name: Leonard Jones
Location: chinnor, Oxfordshire

Greetings one and all.

Postby Avagolen » Wed Jul 08, 2009 7:31 pm

Hi, This is Len from South Oxfordshire. Presently preparing for the collection of one Fury kit from BGH. Looking forward to keeping the spanners clean on nice new nuts and bolts.

jeffw
Posts: 2605
Joined: Wed Jul 01, 2009 12:31 pm
Name: Jeff Wiltshire

Re: Greetings one and all.

Postby jeffw » Wed Jul 08, 2009 8:29 pm

Good luck with the build :) What engine are you putting in ?

Avagolen
Posts: 4
Joined: Thu Jul 02, 2009 7:14 am
Name: Leonard Jones
Location: chinnor, Oxfordshire

Re: Greetings one and all.

Postby Avagolen » Sun Jul 12, 2009 9:56 pm

Hi Jeff,

Well, being adventurous as I am, I am planning a potential 2 stage install. Firstly I will be fitting the Donor 1.8 CVH, as I would really like to keep the registration and then proberly go for something a little more lively. I need to fit a set of bike carbs as I do not want to cut the bonnet - which I already have in the garage plus a set of delortoes if I decide to go that path. I have got a rear mounting thermostat housing, just have to make a blanking plate to close off the original water path to the inlet manifold. Should keep me quiet for a fair time.

Before anyone asks - I do have all of the documentation and even the original chassis plates as I bought, ran and stripped the Sierra. 1992 plate.

Len.


Return to “Introductions”

Who is online

Users browsing this forum: No registered users and 10 guests