Page 1 of 1
New member in Kent
Posted: Thu Jan 21, 2010 11:30 pm
by cheslop
Hi, although I have had my Striker for nearly 3 years I have just got round to joining the forum. I would be interested to see if any other JPSC owners are near to me in Bromley. My own Striker is a live axle Ford x flow machine with a 1700cc engine from Vulcan Engineering with twin webber 40's but only running a BCF2 cam. I am hoping to have a close ratio box fitted by BGH in the next few months as I find the current standard type 9 box a little fustrating. The car is not a show car with some 12,000 miles done in it, however it never fails to leave me with a big smile when I drive it.
100_0050 modified.jpg
Re: New member in Kent
Posted: Thu Jan 21, 2010 11:53 pm
by petercoll
Hi welcome to the forum. That's a very tidy looking Striker.
Pete
Re: New member in Kent
Posted: Tue Feb 09, 2010 8:37 pm
by Maverick440
Mmmmm as Pete said, nice striker
Re: New member in Kent
Posted: Tue Feb 09, 2010 9:00 pm
by David
cheslop wrote:I am hoping to have a close ratio box fitted by BGH in the next few months as I find the current standard type 9 box a little frustrating.
Welcome Cheslop.
If I might be so bold, I'd recommend that you look at the option of a straight-cut box (for instance Tran-X) before plumping definitely for the BGH helical. They make a lot more noise, but will stand up to motorsport rather better if you ever decide to give sprinting/hillclimbing/racing a go.
David