New leader owner
-
- Posts: 37
- Joined: Sat Jul 27, 2019 10:01 am
- Name: Carl Dorling
New leader owner
Hi my names Carl I live in Cheltenham and I have become the proud owner of a very yellow Sylva Leader looking forward to getting her on the road but first I have to work out the crazy wiring and other bodges
- RedStar
- Posts: 120
- Joined: Fri Apr 25, 2014 11:13 am
- Name: Karl Davies
- Location: South Wales
Re: New leader owner
Hi Carl,
Good luck on the work! Pictures of your car always welcome....at least by me.
Good luck on the work! Pictures of your car always welcome....at least by me.
Sylva Star 2L Fiat Twincam with Twin Weber 40 DCOE
Currently being restored after 10 years standing
Currently being restored after 10 years standing
-
- Posts: 37
- Joined: Sat Jul 27, 2019 10:01 am
- Name: Carl Dorling
Re: New leader owner
Hi thanks I will try and post some pics how do I get the pictures to load just reads error file to large
- RedStar
- Posts: 120
- Joined: Fri Apr 25, 2014 11:13 am
- Name: Karl Davies
- Location: South Wales
Re: New leader owner
Sylva Star 2L Fiat Twincam with Twin Weber 40 DCOE
Currently being restored after 10 years standing
Currently being restored after 10 years standing
-
- Posts: 37
- Joined: Sat Jul 27, 2019 10:01 am
- Name: Carl Dorling
Re: New leader owner
Pictures
You do not have the required permissions to view the files attached to this post.
- RedStar
- Posts: 120
- Joined: Fri Apr 25, 2014 11:13 am
- Name: Karl Davies
- Location: South Wales
Re: New leader owner
Looks good! What's the spec?
Sylva Star 2L Fiat Twincam with Twin Weber 40 DCOE
Currently being restored after 10 years standing
Currently being restored after 10 years standing
-
- Posts: 37
- Joined: Sat Jul 27, 2019 10:01 am
- Name: Carl Dorling
Re: New leader owner
Hi yes it’s running a Fiat 1800 twin cam on twin Dellortos it a Chevette based SS leader I’ve had it running but the cabs need balancing and the electrics are horrible
- RedStar
- Posts: 120
- Joined: Fri Apr 25, 2014 11:13 am
- Name: Karl Davies
- Location: South Wales
Re: New leader owner
Might be better to strip, clean and change all the gaskets on the carbs. I did my twin Webers and it wasn't that hard. You can also check all the internal jets.
I'm also (if/when I get time) replacing the whole wiring system in mine! Easier to start again sometimes than try to fix.![Laughing :lol:](./images/smilies/icon_lol.gif)
I'm also (if/when I get time) replacing the whole wiring system in mine! Easier to start again sometimes than try to fix.
![Laughing :lol:](./images/smilies/icon_lol.gif)
Sylva Star 2L Fiat Twincam with Twin Weber 40 DCOE
Currently being restored after 10 years standing
Currently being restored after 10 years standing
-
- Posts: 37
- Joined: Sat Jul 27, 2019 10:01 am
- Name: Carl Dorling
Re: New leader owner
I think I might go that way as whoever did the wiring had good ideas but lacked the ability to carry them out properly and made it over complicated so I’m going to simplify it .
-
- Posts: 37
- Joined: Sat Jul 27, 2019 10:01 am
- Name: Carl Dorling
Re: New leader owner
Hi could someone give me some idea of the hood frame dimensions for the Sylvia leader.
Who is online
Users browsing this forum: No registered users and 7 guests