Hi
Ive had my IRS Striker for eight years now, and some of you may remember the build site I used to have on the internet.........
Nothing much has changed since the day she was built exept for this year ive had the seats re-trimed in leather (oooooo errrrrr... ) and ive finaly got the front steering geometery sorted. If anyone wants to know how to sort out the front end with Siera upright's give me a shout
Car Spec is as follows:
IRS chassis
2.0L Pinto, head work my RedRecKRacing, dynoed at 168bhp at 6450rpm with 154ft/lb of torque
RS2000 sump and aly bell housing with type 9 gearbox
Gax dampers allround (1" longer than stock at the rear) 300lb spring up front 170lb at the rear
100mm ride hight
15" Lenso RS5 rims with 195/45 Yoks
Modified Siera front geometery with rased steering rack
Hi From Crewe "2"
- Maverick440
- Posts: 65
- Joined: Fri Jun 19, 2009 10:22 am
- Name: Mark Taylor
- Location: Crewe Cheshire
-
- Posts: 114
- Joined: Wed Jul 08, 2009 3:12 am
- Name: Ian Kelly
Re: Hi From Crewe "2"
Damn that's clean !!!!
Great looking car Mark, like I say, just nicely pimped! Any pics of the seats?
Ian
Great looking car Mark, like I say, just nicely pimped! Any pics of the seats?
Ian
- Maverick440
- Posts: 65
- Joined: Fri Jun 19, 2009 10:22 am
- Name: Mark Taylor
- Location: Crewe Cheshire
Re: Hi From Crewe "2"
Hi Ian,
Thanks, as requested here are the pictures of the seats now that they have been trimed in Leather and Alcantara. look a bit diffrent that last time......
Carbon Fiber headrest backing plates
New thinner headrests trimmed in leather
Leather tunnel top and gearlever gater
Lether and Alcantara seats
Thanks, as requested here are the pictures of the seats now that they have been trimed in Leather and Alcantara. look a bit diffrent that last time......
Carbon Fiber headrest backing plates
New thinner headrests trimmed in leather
Leather tunnel top and gearlever gater
Lether and Alcantara seats
- adithorp
- Posts: 1198
- Joined: Thu Jul 02, 2009 8:26 am
- Name: adrian thorp
- Location: Hyde, Manchester
Re: Hi From Crewe "2"
Thats nice. Bit of an improvement on the bare foam look at Stoneliegh.
adrian
adrian
Who is online
Users browsing this forum: No registered users and 105 guests